• 1
  • 2
  • 3
  • 4
  • 5
  • 6
目前适合采用CO2激光切割的产品大体上可归纳为三类
 

1:要求均匀切缝的特殊零件。最广泛应用的典型零件是包装印刷行业用的模切版,它要求在20mm厚的木模板上切出缝宽为0.7~0.8mm的槽,然后在槽中镶嵌刀片。使用时装在模切机上,切下各种已印刷好图形的包装盒。国内近年来应用的一个新领域是石油筛缝管。为了挡住泥沙进入抽油泵,在壁厚为6~9mm的合金钢管上切出<0.3mm宽的均匀切缝,起割穿孔处小孔直径不能>0.3mm,切割技术难度大,已有不少单位投入生产。


2:从技术经济角度不宜制造模具的金属钣金件,特别是轮廓形状复杂,批量不大,一般厚度<12mm的低碳钢、<6mm厚的不锈钢,以节省制造模具的成本与周期。已采用的典型产品有:自动电梯结构件、升降电梯面板、机床及粮食机械外罩、各种电气柜、开关柜、纺织机械零件、工程机械结构件、大电机硅钢片等。

3:装饰、广告、服务行业用的不锈钢(一般厚度<3mm)或非金属材料(一般厚度<20mm)的图案、标记、字体等。如艺术照相册的图案,公司、单位、宾馆、商场的标记,车站、码头、公共场所的中英文字体。

 

1: the requirements of the special parts of the uniform cut. The most widely used typical parts of the packaging printing industry with the die cutting version, it requires the 20mm thick wood template cut out of the slot width of the 0.7~0.8mm slot, and then insert the blade in the groove. Using fashion in the die - cutting machine, cutting all kinds of packaging boxes have been printed. In recent years, the application of a new area is the oil sieve tube. In order to block the sediment into the oil pump, in the wall thickness of 6~9mm alloy steel pipe cut out <0.3mm wide uniform cut, cut through the hole diameter can not >0.3mm, cutting technology is difficult, many units have been put into production.


2: from the technical and economic point of view is not the manufacture of metal sheet metal parts, in particular the outline of the complex shape, small batch, the general thickness of <12mm low carbon steel, <6mm thick stainless steel, in order to save the cost of manufacturing tooling and cycle. Has the typical products are: automatic elevator structure, lifting elevator panel, machine and food machine cover, electrical cabinet, switch cabinet, textile machinery parts, engineering machinery parts and a large motor silicon steel sheet.


3: decoration, advertising, service industry with stainless steel (general thickness of <3mm) or non-metallic materials (general thickness of <20mm) pattern, mark, font, etc.. Such as art photo album design, companies, units, hotels, shopping malls, stations, terminals, public places in English font.

 

官方网站:http://www.hfzbjg.com

相关内容:
浅谈CO2激光切割技术比其他方法的优点
增宝机械浅谈数控转塔冲床运动轴
数控冲床国产机型之螺杆式和曲轴式伺服
增宝机械浅谈数控转塔冲床的加工方式
合肥增宝机械浅谈数控冲床的保养技巧
增宝机械浅谈数控转塔冲床的维护保养的注意问题



上一篇: 浅谈CO2激光切割的工业应用
下一篇: 浅谈CO2激光切割系统的购置着主要是两类