• 1
  • 2
  • 3
  • 4
  • 5
  • 6
合肥增宝机械浅谈数控冲床的输入输出信号大致包括五类信号
 

1)通信与网络接口:通常数据装置均具有标准的RS-232接口,许多系统同时还配有 却时电流环及RS-422远程通信接口。作为选件,还可配置各种网络接口。注册食品公司

2)位置反馈输入:用于各进给轴与主轴位置的接收、处理以及计数。

3)模拟量输出:高分辨率的模拟量输出用于控制进给伺服与主轴驱动的转速。 

4)开关量I/O:用于完成机床的开关量辅助功能控制以及数控系统与机床信号的交换。

5)孚轮输入:用于连接MPG手轮脉冲发生器



1 communication and network interface: usually the data device has a standard RS-232 interface, many systems are also equipped with a current loop and RS-422 remote communication interface. As an option, can configure the network interface.

2) position feedback input: the receiving, processing and counting of the feed shaft and the main shaft position.

3) analog output: high resolution analog output for control of the feed servo and spindle drive speed.

4) switch I/O: is used to complete the switch of the machine tool control and the exchange of the numerical control system and the signal of the machine tool.

Rufus: 5) wheel input for connecting MPG pulse generator wheel.






官方网站:http://www.hfzbjg.com
上一篇: 浅谈数控冲床的输入/输出接口
下一篇: 浅谈数控冲床各单元的信号传递