• 1
  • 2
  • 3
  • 4
  • 5
  • 6
增宝机械浅谈数控转塔冲床的维护保养的注意问题
 

1、数控转塔冲床在较长时间内不需要使用的情况下,应每隔半个月对加热板进行加热。


1, CNC turret punch press in a longer period of time without the use of the case, the heating plate should be heated every half month.


2、如果在使用过程中,因操作不当导致加热板进水,应首先联系厂家进行维修。如果需要进行应急抢修,可将加热板上盖板打开,先将水倒出,线路的整体更换。


2, if the use of the process, due to improper operation led to the heating board water, should first contact the manufacturer for maintenance. If the need for emergency repairs, the heating plate plate is opened, the water poured out, replace the whole line.


3、不要在雨天在室外使用数控转塔冲床;


3, do not use the numerical control turret punch in the rain in the rain;


4、数控转塔冲床存放环境应保持干燥、通风良好,避免因潮湿导致电器线路潮湿;


4, CNC turret punch press storage environment should be kept dry, well ventilated, to avoid moisture caused by wet electrical lines;


5、不要让数控转塔冲床同水直接接触;


5, do not let the CNC turret punch press in direct contact with the water;

 

官方网站:http://www.hfzbjg.com

上一篇: 浅谈数控冲床操作时候应该注意的事项
下一篇: 浅谈数控转塔冲床的多种不足