• 1
  • 2
  • 3
  • 4
  • 5
  • 6
浅谈数控转塔冲床的几个部位的介绍
 

1、 数控冲床顶杆是以向上动作直接或问接顶出工件或序料的杆状零件。顶板是在凹模或模块内活动的板状零件,以向上动作直接或问接顶出工件或废料。

2、数控转塔冲床侧刃是在条(带、卷)料侧面切出送料定位缺口的凸模。侧压板是对条(带、卷)料一侧通过弹簧施加压力,促使其另一侧紧靠.导料板的板状零件。

3、数控转塔冲床限位柱是限制冲模最小闭合高度的柱形件。定位销(板)是保证工序件在模具内有不变位置的零件,以其形状不同而称为定位销或定位板。

4、数控转塔冲床齿圈是精冲凹模或带齿压料板上的成圈齿形突起,是凹模或带齿压料板的局部结构而不是单独的零件。

 

1, the numerical control punch press the top rod is to move directly or to ask the top of the workpiece or the sequence of the rod parts. The top plate is a plate shaped part which is movable in the concave die or the module, which is directly or indirectly connected with the work piece or the waste material.

2, CNC turret punch press is in the strip (strip, roll) cutting out of the side of the feed positioning of the cutting edge of the punch. Is on the side plate (belt, roll) material side through the spring pressure to close to the other side of the guide plate plate part.

3, CNC turret punch press limit column is the minimum closure height of the column of the column. Positioning pin (plate) is to ensure that the process parts in the mold has the same location of the parts, the shape of the different and known as the positioning pin or positioning plate.

4, CNC turret punch press ring gear is fine blanking die or toothed pressure plate into gear shaped protrusions, die or toothed plate pressure the local structure rather than separate parts.



官方网站:http://www.hfzbjg.com

上一篇: 增宝机械浅谈数控转塔冲床的加工方式
下一篇: 合肥增宝机械浅谈数控冲床的保养技巧