联系我们

地址:安徽省合肥市蜀山区
QQ:1185058891
手机:18119695096
行业新闻

合肥钣金加工浅谈激光焊接应用船舶结构研究

该船由多个零件组成,适用于激光焊接船舶甲板和舱壁的主要部位,由于船舶甲板和舱壁、直焊缝长度和对接接头和T形接头,由于其外观、焊接变形、焊接板材料,激光焊接是首选。

图三 激光焊接用三明治板焊接缝(左)及夹芯板堆放图(右)(德国Meyer船厂)
图三 激光焊接用三明治板焊接缝(左)及夹芯板堆放图(右)(德国Meyer船厂)


船舶在激光焊接中的应用,使船舶的设计发生了巨大的变化。夹层夹芯板结构是结构设计中的经典之作。三明治板可以分为I,T,O,Z,x等,如图四所示,根据三明治的不同。



图四..激光焊接三明治不同夹芯形式
I型夹芯........................................................................O型夹芯
图四...................................................激光焊接三明治不同夹芯形式



夹芯板夹芯板加固是指在两个网站中板焊接,它是由桩焊接激光焊接技术焊接新股权,充分发挥好的特点,激光深熔焊接,激光束通过面板时,然后熔化接近面板下面的网页,所以完整这两部分焊接连接,基本原理如图所示。


三明治[13-14]德国Meyer船厂与Web平台,广泛应用在豪华邮轮的甲板、舱壁、舱内的墙壁和楼梯的基础结构,与传统的蜂窝板加强筋板夹芯板焊接具有以下优点:[ 13 ] 1,质量可减少50%以上,占据空间可节约50%;2,噪声可降低80%,防震能力大大增强;3,从事碰撞,耐腐蚀,防火性能好;4,在高精度、高质量的生产车间,与传统加工方法相比可节省约30%小时的现场组装。

The ship is made up of many parts. It is suitable for the main parts of laser welded ship deck and bulkhead. Because of the deck and bulkhead, straight weld length and butt joint and T type joint, the laser welding is the first choice due to its appearance, welding distortion and welding plate material.

The application of ships in laser welding has made great changes in the design of the ship. Sandwich sandwich plate structure is a classic in structure design. Sandwiches can be divided into I, T, O, Z, x, etc., as shown in Figure four, depending on the different sandwiches.

Sandwich plate sandwich plate reinforcement refers to the welded plate in the two site, which is composed of a pile of laser welding welding technique of new equity, give full play to the characteristics of deep penetration laser welding, laser beam through the panel, and then melting close below the panel ", so complete the two parts are connected by welding, the basic principle is shown figure.

Sandwich [13-14] German Meyer shipyard and Web platform, the basic structure of the walls and stairs are widely used in luxury cruise decks, bulkheads, the reinforcement plate of sandwich panel with honeycomb plate of traditional welding has the following advantages: [13] 1, the quality can be reduced by more than 50%, occupied space can be saved by 50%; 2. The noise can be reduced by 80%, shockproof ability greatly enhanced; 3, engaged in the collision, corrosion resistance, good fireproof performance; 4, the high precision and high quality production workshop, compared with the traditional processing method can save about 30% hours to assemble the scene.




官方网站:http://www.hfzbjg.com/

最新内容:



上一篇: 增宝机械设备浅谈国内外激光焊接研究状况
下一篇: 光纤激光切割机的切割系统和激光切割机的维护

    版权所有:合肥机械设备有限公司 合肥墙绘 QQ:1185058891 手机:18119695096 邮箱:18119695096@qq.com地址:合肥市桃花工业园拓展区汤口路与万佛山路交口

关键词:合肥激光切割加工  合肥激光切割钣金加工  合肥钣金加工  合肥碳钢板加工  合肥不锈钢切割  合肥钢板切割  合肥碳钢板切割  合肥大型激光切割加工