联系我们

地址:安徽省合肥市蜀山区
QQ:1185058891
手机:18119695096
行业新闻

合肥钣金加工浅谈光纤切割工艺有哪些特点?

与传统的CO2激光切割相比,光纤激光在金属板材切割中的应用不同于外部光路、切割头、辅助气体等。直接激光通过光纤到切割头,光路稳定可靠,确保整机切割机的一致性不需要格式化,光学防护气体,将配备空气压缩机和空气处理系统;


合肥钣金加工浅谈光纤切割工艺有哪些特点?


Compared with the traditional CO2 laser cutting, the application of fiber laser in the cutting of metal plate is different from that of the external optical path, cutting head and auxiliary gas. The direct laser passes through the optical fiber to the cutting head, the optical path is stable and reliable, and the consistency of the whole cutting machine is not required to be formatted;


激光切割头的聚焦耦合后,通常聚焦透镜焦距125mm或200mm的配置,保护透镜聚焦透镜和喷嘴之间,用于防止通过聚焦镜污染;用短焦深的光纤激光器的聚焦性能好,切缝宽度窄(可达0.1mm),速度高,适用于快速切割板。


Focus on the coupling of laser cutting head, the focal length of the lens is usually 125mm or 200mm configuration, between the protection of the lens focusing lens and a nozzle, used to prevent pollution by focusing lens with short focal depth; fiber laser focusing performance, narrow kerf width (up to 0.1mm), high speed, suitable for fast cutting board.




合肥钣金加工官方网站:http://www.hfzbjg.com/
 

最新内容:



上一篇: 合肥钣金加工浅谈光纤激光器有哪些特点?
下一篇: 怎样保证双边驱动的同步和双边传动的精度?

    版权所有:合肥机械设备有限公司合肥网络工程 合肥墙绘 QQ:1185058891 手机:18119695096 邮箱:18119695096@qq.com地址:合肥市桃花工业园拓展区汤口路与万佛山路交口

关键词:合肥激光切割加工  合肥激光切割钣金加工  合肥钣金加工  合肥碳钢板加工  合肥不锈钢切割  合肥钢板切割  合肥碳钢板切割  合肥大型激光切割加工