联系我们

地址:安徽省合肥市蜀山区
QQ:1185058891
手机:18119695096
行业新闻

激光的典型应用之离线式汽车拼焊板成型设备

大部分钢板的使用是镀锌钢,电阻焊接过程会造成保护层的破坏,使镀锌层的损坏很容易生锈。因此,激光焊接已成为实现焊接的理想技术,可以保证焊缝成形的合格,并能满足防腐、高强度和抗疲劳的要求。


激光焊接技术具有许多优点,焊缝很窄,热影响区很小,通过长范围的锌牺牲效果,焊缝不能长时间腐蚀,焊接速度越高,焊缝的硬度越高。

 

Most of the use of the steel plate is galvanized steel, resistance welding process will cause the destruction of the protective coating, so that damage to the galvanized coating area is easy to rust. Therefore, laser welding has become an ideal technology to realize welding, which can guarantee the qualified welding seam forming, and can meet the requirements of corrosion prevention, high strength and anti fatigue.


Laser welding technology has many advantages, the weld is very narrow, the heat affected zone is very small, through the long range of zinc sacrificial effect, the welding seam can not be corroded for a long time, the welding speed, the higher the hardness of the weld.

 

 

合肥钣金加工官方网站:http://www.hfzbjg.com/


最新内容:



上一篇: 激光的典型应用之汽车白车身顶盖激光焊接设备
下一篇: 汽车齿轮激光焊接和汽车尾管激光焊接生产线

    版权所有:合肥机械设备有限公司合肥网络工程 合肥墙绘 QQ:1185058891 手机:18119695096 邮箱:18119695096@qq.com地址:合肥市桃花工业园拓展区汤口路与万佛山路交口

关键词:合肥激光切割加工  合肥激光切割钣金加工  合肥钣金加工  合肥碳钢板加工  合肥不锈钢切割  合肥钢板切割  合肥碳钢板切割  合肥大型激光切割加工