联系我们

地址:安徽省合肥市蜀山区
QQ:1185058891
手机:18119695096
行业新闻

浅谈数控冲床信号的分类

   从数控冲床信号传递来看,主要有两类:一类是单台机床内部各种部件之间的信号传递;另一类是机床与机床之间或机床与数控装置之间的信号传递。其中第一类信号主要包括:控制机床坐标轴实时运动的相关信号,由数控装置将控制信号传递给对应的驱动装置(伺服或变频)。


    由驱动装置控制相同的电动机旋转:机床运行前后,数控装置对机床上各种开关信号的处理,包括主轴、切削液泵起停等机床按钮和各行程开关信号等。第二类信号主要是指数控系统之间通信,包括RS-232C通信和调制解调器等通信方式。

 

From the point of view of the numerical control punch press signal transmission, there are two kinds: one kind is the signal transmission between the various parts of a single machine tool; the other is the signal transmission between the machine tool and the machine tool or the machine tool and the numerical control device. The first kind of signal mainly includes: the control of the coordinate axis of the machine tool real-time movement of the relevant signal, by the numerical control device will control signal transmission to the corresponding drive device (servo or frequency conversion).


By the driving device to control the same motor rotation: before and after the machine tool, CNC device on the various switching signal processing, including the spindle, the cutting fluid pump up and stop and other machine tools button and the travel switch signal, etc.. The second kind of signal mainly refers to the communication between CNC system, including RS-232C communication and modem and other means of communication.

 

 

官方网站:http://www.hfzbjg.com


最新内容:



上一篇: 增宝机械浅谈数控冲床安全操作规程
下一篇: 浅谈数控冲床接口的分类规范

    版权所有:合肥机械设备有限公司合肥网络工程 合肥墙绘 QQ:1185058891 手机:18119695096 邮箱:18119695096@qq.com地址:合肥市桃花工业园拓展区汤口路与万佛山路交口

关键词:合肥激光切割加工  合肥激光切割钣金加工  合肥钣金加工  合肥碳钢板加工  合肥不锈钢切割  合肥钢板切割  合肥碳钢板切割  合肥大型激光切割加工